Installation Guide

Every shade ships with all hardware included. Most installations take under 10 minutes per window.

What You'll Need

A drill/driver, pencil, level, and a step stool for higher windows. That's it.

Inside Mount (3 Steps)

1
Position Brackets
Hold the brackets at the top inside of the window frame, 2–3 inches from each end. Mark screw holes with a pencil.
2
Drill & Secure
Pre-drill pilot holes, then screw brackets in with the included screws. Use a level to confirm they're even.
3
Snap In the Shade
Insert one end of the roller into the bracket, then snap the other end in. Test the shade by pulling down and releasing.

Outside Mount (3 Steps)

1
Position Brackets
Hold brackets on the wall above the window frame where marked. Use a level to ensure they're straight.
2
Drill & Secure
Use wall anchors if not drilling into a stud. Secure brackets with screws.
3
Snap In the Shade
Same snap-in process as inside mount. Test operation and adjust as needed.

Motorized Shades

Motorized shades install identically — the motor is pre-installed inside the roller tube. After mounting, simply pair the remote by pressing the pairing button on the motor head.

Need Help With Installation?

Contact our team for free installation support, or ask about our professional installer network.